 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| MICROWAVE CORPORATION v01.0801 HMC171C8 GaAs MMIC SMT DOUBLEBALANCED MIXER, 7 - 10 GHz Features Conversion Loss: 9.0 dB LO to RF Isolation: 32 dB Surface Mount Small Size, No DC Bias Required Typical Applications The HMC171C8 is ideal for: * Microwave Pt to Pt Radios * 5.8 GHz ISM Band Circuits Functional Diagram General Description The HMC171C8 is a miniature double-balanced mixer in a non-hermetic ceramic surface mount package that can be used as an upconverter, downconverter or biphase modulator. The device is a passive diode/balun type mixer with high dynamic range. Noise figure is essentially equal to the conversion loss. The mixer can handle larger signal levels than most active mixers due to the high third order intercept. MMIC implementation provides exceptional balance in the circuit resulting in high LO/RF and LO/IF isolations and unit-to-unit consistency. This mixer has applications in circuits where small size and surface mount compatibility are important. 12 MIXERS - SMT Electrical Specifications, TA = +25 C, LO Drive = +10 dBm Parameter Frequency Range, RF & LO Frequency Range, IF Conversion Loss Noise Figure (SSB) LO to RF Isolation LO to IF Isolation IP3 (Input) IP2 (Input) 1 dB Gain Compression (Input) 28 21 12 55 7 Min. Typ. 7.0 - 10.0 DC - 2 9 9 32 26 16 62 10 10 10 Max. Units GHz GHz dB dB dB dB dBm dBm dBm 12 - 26 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com MICROWAVE CORPORATION v01.0801 HMC171C8 GaAs MMIC SMT DOUBLEBALANCED MIXER, 7 - 10 GHz Conversion Loss 0 CONVERSION LOSS (dB) Isolation 0 -10 ISOLATION (dB) -5 RF/IF -20 LO /IF -10 -30 -40 -50 LO/IF LO/RF -15 -20 0 1 2 3 4 5 6 7 8 9 10 11 12 -60 0 1 2 3 4 5 6 7 8 9 10 11 12 FREQUENCY (GHz) FREQUENCY (GHz) 12 MIXERS - SMT 12 - 27 Conversion Loss vs LO Drive -5 CONVERSION LOSS (dB) Distortion and 1dB Compression vs. LO Drive Level Distortion -7.5 LO Drive -10 +15dBm +13dBm +10dBm +8dBm +9dBm 2 3 4 5 6 7 8 9 10 11 12 13 14 RF (f1) = 8.01 GHz RF (f2) = 8.00 GHz LO = 8.5 GHz Rf Level = 0 dBm IP3 (dBm) 13 16 IP2 (dBm) 59 62 1 dB Compression (dBm) +7 +10 P1dB (dBm) 8.5 10.0 -12.5 -15 FREQUENCY (GHz) Return Loss 0 LO RETURN LOSS (dB) -10 IF RF -20 -30 -40 0 1 2 3 4 5 6 7 8 9 10 11 12 FREQUENCY (GHz) S - Paremeters for the RF, LO, IF Ports are Available On-Line at www.hittite.com For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com v01.0801 MICROWAVE CORPORATION HMC171C8 GaAs MMIC SMT DOUBLEBALANCED MIXER, 7 - 10 GHz Absolute Maximum Ratings RF / IF Input LO Drive Storage Temperature Operating Temperature +13 dBm +27 dBm -65 to +150 C -55 to +85 C 12 Outline Drawing MIXERS - SMT NOTES: 1. PACKAGE BODY MATERIAL: WHITE ALUMINA 92% 2. LEAD, PACKAGE BOTTOM MATERIAL: COPPER 3. PLATING: ELECTROLYTIC GOLD 100-200 MICROINCHES, OVER ELECTROLYTIC NICKEL 100-250 MICROINCHES. 4. DIMENSIONS ARE IN INCHES [MILLIMETERS]. 5. PACKAGE LENGTH AND WIDTH DIMENSIONS DO NOT INCLUDE LID SEAL PROTRUSION .005 PER SIDE. 6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. 12 - 28 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com v01.0801 MICROWAVE CORPORATION HMC171C8 GaAs MMIC SMT DOUBLEBALANCED MIXER, 7 - 10 GHz Evaluation PCB 12 MIXERS - SMT List of Material Item J1 - J3 U1 PCB* Description PC Mount SMA RF Connector HMC171C8 Mixer 107214 Evaluation Board * Circuit Board Material: Rogers 4350 The circuit board used in the final application should use RF circuit design techniques. Signal lines should have 50 ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of VIA holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com 12 - 29 |
Price & Availability of HMC171C8
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |